Programming of the Emlink2 is via a menu driven system using 2 switches and the signal and status LED’s. Other useful features of the Emlink2 is site survey mode which emits a beacon signal every 2 seconds, so an engineer installing the second unit will be able to see and position the Emlink2 for the best signal strength.
The 2 input channels on the Emlink2 can be used as an analogue input for remote monitoring (Data Logging etc) or simply as a switched digital input. Another useful feature for the inputs is to pair its own input to an output. Using this feature in conjunction with an output timer, the Emlink2 can work as a local timer while still transmitting its status to remote Emlink2 units.
Outputs 1 & 2 can be used in one of three ways, Momentary, Toggle or Timer mode. The third output can be programmed as a tamper circuit which can monitor not only its own tamper switch but remote tamper switches and also monitor remote units for power failure, signal jamming etc.
The Emlink2 is 100% compatible with the Emlink1's switching channels.
Each kit consists of:
1 x Emlink2 transceiver
1 x 433MHz antenna
1 x Rubber washer
A minimum of 2 Emlink2 interfaces are required to make a working system.
Multiple units can be used in a single system.
Emlink2 433MHz Wireless Interface (Switching Only)
- Brand: EMCLR LTD
- Product Code: Emlink1
- Availability: In Stock
- Ex Tax: £79.95